How to choose a rim for pear-shaped diamonds?
Pear-shaped cut diamonds has its own specifics. It is an oval with one sharp angle. This sharp edge of the stone is the most vulnerable point, it can be easily broken or broken off, if you hit hard enough.
Therefore, to protect the stone from external influence, it is necessary to use a rim frame for its angle. The most popular lock is krapanov frame, where the stone is held by a few teeth.
Which is best to choose a frame for a pear-shaped diamond
Installation using krapanov.
The main advantage of Krapanov is that they allow the light to play freely on the surface of the stone, which makes it more expressive.
In this case, the teeth do not guarantee the safety of the stone, they can easily break or bend.
Usually, four or six teeth are used for setting and setting the stone, sometimes eight. On the one hand, the more teeth, the more reliable they hold the stone.
On the other hand, a large number of teeth increases the cost of regularly checking and repairing jewelry when they begin to thin and deform.
For a pear shaped diamond, you can use four krapana, then the stone will look more angular. This is due to the fact that the four teeth visually create the impression of a quadrilateral.
The presence of six or eight krapanov will give the form more roundness. To choose the most suitable one, you need to compare different frames and the way a diamond looks in them.
It is best for reliability to choose such a frame, where one of the teeth holds an acute angle and thereby protects it from damage. V-shaped teeth best hold and protect the sharp edges of the stones.
Therefore, when choosing a frame for a pear-shaped diamond, it is best to choose an ornament with a V-shaped tooth, which is kept at an acute angle, framing it with a piece of metal. Moreover, the stone itself will not necessarily be fastened with the same krapan, they can be of any other shape, for example, a round one.
What is the rim of a ring with V-teeth and when should you choose it?
The teeth are used to hold precious stones in the frame of the ring. Their standard construction is curved at the end, and holds stones, grabbing them from the top. The tips of these teeth are often rounded and may lie flat on the surface of a gemstone.
V-teeth, as you might have guessed, are shaped like the letter V – they grip the stone with sharp ends and hold it along the edges, from top to bottom. Depending on their design, they may be sharp on the outside or more rounded. What is the rim of a ring with V-teeth?
One of the advantages of V-waves is that they wrap the edges of the stone and protect it from impact.
The edge is one of the most vulnerable parts of the gem – if you hit it a little harder, it can easily break.
Another advantage of the V-teeth is that they do not close the top as tightly as normal teeth do, leaving a large surface of the gem visible.
The disadvantages of V-waves.
Perhaps the biggest problem is that they do not capture the top of the stones, as round teeth do. That is why some jewelry buyers are afraid that the stone can easily slip out of the V-teeth.
Although this may be true for some models, there are many designs in which the top edge of the stone is pretty well wrapped.
Although the V-teeth improve the visibility of the top of the stone, some do not like the fact that they cover its sides, thus detracting from the beauty of the ring when viewed from the side.
When should V-teeth be used to fix a diamond? There are V-shaped teeth that have sharp edges that some people consider unsafe. If you are also worried about this, choose a more rounded design.
When should I use V-teeth, in which cases – standard ones?
V-teeth are most suitable for stones with more angular shapes and having sharp edges. They are recommended for such cuts, such as pear, princess, heart, marquis, and trillion crests.
Round stones, on the other hand, are not suitable for V-waves. Therefore, if you have a classic round cut diamond, you will need to install it in a standard frame.
In general, you should make a decision about framing, first of all, looking at the shape of your stone. If it has sharp edges, V-teeth will be the best option in terms of safety.
However, make sure that the teeth design does not have sharp tips, otherwise they may cling to your clothes and other things.
Finally, make sure that the V-shaped teeth securely hold the stone and bend around its upper corners.
Blind fixing of a pear-shaped diamond.
The installation of a pear-shaped diamond in a dead setting or frame is also popular. This type of frame is more secure for the integrity of the stone. Deaf set of a pear-shaped diamond.
